
Motul
MOTUL ENGINE OIL 8100 ECO-LITE 0W20 1L
Regular price
$17.95
- Gasoline engine oil
- 100% Synthetic – Ester Based
TYPE OF USE
- "Fuel economy" engine oil specially designed for recent cars, powered with gasoline engines, designed to use oil with low friction, very low HTHS viscosity (≥ 2.60 mPa.s) and "Mid SAPS" reduced content of sulfated ash (≤ 0.8%), phosphorus (0.07 ≤ x ≤ 0.09%) and sulphur (≤ 0.3%).
- Catalytic converter friendly.
- These oils may be unsuitable for use in some engines. Refer to the owner manual or handbook if in doubt.
PERFORMANCES
- Standards : API SM / CF
-
Recommandations : HONDA Europe gasoline engines
MAZDA gasoline engines
SUBARU SOHC (single overhead camshaft) engines - The new API SM standard is fully backward compatible over API SL requirements and all former API standards.
- API SM lubricants provide outstanding oxidation resistance, better anti-deposits protection, better engine cleanliness, anti-wear protection and enhanced performance at cold temperature during the whole oil life span.
- Viscosity grade SAE 0W-20 minimises oil hydrodynamic friction, allows fuel economy especially when oil is cold.
- Improves oil flow at start up, faster oil pressure build up, faster rev raisings and reach operating temperature faster.
- Environment friendly, this type of oil allows fuel consumption reduction and therefore minimises green house gases (CO2) emissions.
RECOMMENDATIONS
- Drain interval : refer to manufacturers’ recommendations and tune to your own use.
- Can be mixed with synthetic or mineral oils.
PROPERTIES
Viscosity grade | SAE J 300 | 0W-20 |
Density at 20°C (68°F) | ASTM D1298 | 0.838 |
Viscosity at 40°C (104°F) | ASTM D445 | 48.6 mm²/s |
Viscosity at 100°C (212°F) | ASTM D445 | 8.8 mm²/s |
HTHS viscosity at 150°C (302°F) | ASTM D4741 | 2.69 mPa.s |
Viscosity index | ASTM D2270 | 162 |
Pour point | ASTM D97 | < -50°C / < -58°F |
Flash point | ASTM D92 | 238°C / 460.4°F |
Sulfated ash | ASTM D874 | 0.07% weight |
TBN | ASTM D2896 | 8.4 mg KOH/g |