Motul

MOTUL ENGINE OIL 8100 X-CLEAN 5W30 C3 1L MOTUL ENGINE OIL 8100 X-CLEAN 5W30 C3 1L

Many in stock

Maintenance

Motul

$12.95
$12.95
  • Gasoline & Diesel lubricant - EURO IV and V
  • 100% Synthetic

TYPE OF USE

  • High performance 100% synthetic lubricant approved by many car manufacturers.
  • Specially designed for last generation cars, powered by turbo Diesel direct injection or Gasoline engines, EURO IV or EURO V emission regulation compliant, requiring an ACEA C3 engine oil i.e. high HTHS (> 3.5 mPa.s) viscosity and "Mid SAPS" with reduced content of suphated ash (≤ 0.8%), phosphorus (0.07 ≤ x ≤ 0.09%) and sulphur (≤ 0.3%).
  • Compatible with catalytic converters and Diesel Particulate Filters (DPF).
  • Suitable also for any type of Diesel or Gasoline engines calling for ACEA A3/B3 or A3/B4 lubricant.
  • Before use always refer to the owner manual or handbook of the vehicle.

PERFORMANCES

  • Standards : ACEA A3 / B4 – C3 – API SM / CF
  • Approvals :
    • BMW Long Life-04
    • MB-Approval 229.51
    • VW 502 00 – 505 00
  • Performances : FIAT 9.55535-S2
  • Recommandations : FIAT, HYUNDAI / KIA, NISSAN, RENAULT, SSANGYONG, SUZUKI …
  • Engines compliant with EURO IV and EURO V emission regulation are fitted with sensitive exhaust gas after treatment systems. Indeed, Sulfur and Phosphorus inhibit catalytic converters operation leading to inefficient exhaust gas treatment; and Sulfated Ashes clog DPFs leading to shorten regenerating cycle, quick oil aging, higher fuel consumption and engine power loss.
  • The ACEA C3 standard requests from the lubricant significant oil film resistance and low emission performance for powerful engines : MOTUL 8100 X-clean 5W-30 has synthetic base stocks and dedicated SAPS levels that generates outstanding oil film resistance, reduces friction in the engine and provides after treatment devices compatibility. MOTUL 8100 X-clean 5W-30 brings high lubricating properties such as wear protection and high temperature resistance for better controlled oil consumption. ACEA C3 lubricants achieve extended drain intervals managed by vehicles on-board computer.
  • Numerous OEMs such as FIAT, HYUNDAI / KIA, NISSAN, RENAULT, SSANGYONG, SUZUKI,… recommend an ACEA C3 lubricant for most of their vehicles especially Diesels with DPF.
  • The BMW Long Life-04 specification imposes severe constraints to the lubricant particularly due to Valvetronic and after treatment systems compatibility. It covers all BMW engines from 2004 and also all BMW engines before 2004 as BMW LL-04 covers all the previous BMW specifications such as BMW LL-98 and BMW LL-01.
  • ATTENTION : BMW LL-04 product can be used for gasoline engines only in European Union countries, Switzerland, Norway and Liechtenstein. Outside those countries, a BMW LL-01 lubricant such as MOTUL 8100 X-cess 5W-40 is required. Refer to BMW recommendation.
  • The MB 229.51 requires among many other severe constrains from the lubricant a reduced content of Sulfted Ash, Phosphorus and Sulphur in order to be compatible with MERCEDES exhaust gas after treatment systems. The specification MB 229.51 applies to some MERCEDES Gasoline engines, and to all MERCEDES Diesel engines, with or without DPF.
  • Specifications VW 502 00 and VW 505 00 require outstanding detergent/dispersant power, high oil film resistance and better viscosity increase resistance due to soot in order to cover many Gasoline engines and most of Direct Injection Diesel engines, except unit injector systems which require an approved VW 505 01 lubricant such as MOTUL Specific 505 01 505 00 502 00 5W-40 or MOTUL 8100 X-clean 5W-40. Attention, do not use MOTUL 8100 X-clean 5W-30 when a VW 504 00 or VW 507 00 lubricant is required, in that case use MOTUL Specific 504 00 507 00 5W-30 or MOTUL 8100 X-clean+5W-30.

RECOMMENDATIONS

  • Drain interval : refer to manufacturers' recommendations and tune to your own use.
  • Do not mix with lubricants not ACEA C3 compliant.
  • Before use always refer to the owner manual or handbook of the vehicle.

PROPERTIES

Viscosity grade SAE J 300 5W-30
Density at 20°C (68°F) ASTM D1298 0.847
Viscosity at 40°C (104°F) ASTM D445 70.8 mm²/s
Viscosity at 100°C (212°F) ASTM D445 12.0 mm²/s
HTHS viscosity at 150°C (302°F) ASTM D4741 3.5 mPa.s
Viscosity index ASTM D2270 166
Pour point ASTM D97 -36°C / -32.8°F
Flash point ASTM D92 230°C / 446°F
Sulfated ash ASTM D874 0.79% weight
TBN ASTM D2896 7.4 mg KOH/g
  • Gasoline & Diesel lubricant - EURO IV and V
  • 100% Synthetic

TYPE OF USE

  • High performance 100% synthetic lubricant approved by many car manufacturers.
  • Specially designed for last generation cars, powered by turbo Diesel direct injection or Gasoline engines, EURO IV or EURO V emission regulation compliant, requiring an ACEA C3 engine oil i.e. high HTHS (> 3.5 mPa.s) viscosity and "Mid SAPS" with reduced content of suphated ash (≤ 0.8%), phosphorus (0.07 ≤ x ≤ 0.09%) and sulphur (≤ 0.3%).
  • Compatible with catalytic converters and Diesel Particulate Filters (DPF).
  • Suitable also for any type of Diesel or Gasoline engines calling for ACEA A3/B3 or A3/B4 lubricant.
  • Before use always refer to the owner manual or handbook of the vehicle.

PERFORMANCES

  • Standards : ACEA A3 / B4 – C3 – API SM / CF
  • Approvals :
    • BMW Long Life-04
    • MB-Approval 229.51
    • VW 502 00 – 505 00
  • Performances : FIAT 9.55535-S2
  • Recommandations : FIAT, HYUNDAI / KIA, NISSAN, RENAULT, SSANGYONG, SUZUKI …
  • Engines compliant with EURO IV and EURO V emission regulation are fitted with sensitive exhaust gas after treatment systems. Indeed, Sulfur and Phosphorus inhibit catalytic converters operation leading to inefficient exhaust gas treatment; and Sulfated Ashes clog DPFs leading to shorten regenerating cycle, quick oil aging, higher fuel consumption and engine power loss.
  • The ACEA C3 standard requests from the lubricant significant oil film resistance and low emission performance for powerful engines : MOTUL 8100 X-clean 5W-30 has synthetic base stocks and dedicated SAPS levels that generates outstanding oil film resistance, reduces friction in the engine and provides after treatment devices compatibility. MOTUL 8100 X-clean 5W-30 brings high lubricating properties such as wear protection and high temperature resistance for better controlled oil consumption. ACEA C3 lubricants achieve extended drain intervals managed by vehicles on-board computer.
  • Numerous OEMs such as FIAT, HYUNDAI / KIA, NISSAN, RENAULT, SSANGYONG, SUZUKI,… recommend an ACEA C3 lubricant for most of their vehicles especially Diesels with DPF.
  • The BMW Long Life-04 specification imposes severe constraints to the lubricant particularly due to Valvetronic and after treatment systems compatibility. It covers all BMW engines from 2004 and also all BMW engines before 2004 as BMW LL-04 covers all the previous BMW specifications such as BMW LL-98 and BMW LL-01.
  • ATTENTION : BMW LL-04 product can be used for gasoline engines only in European Union countries, Switzerland, Norway and Liechtenstein. Outside those countries, a BMW LL-01 lubricant such as MOTUL 8100 X-cess 5W-40 is required. Refer to BMW recommendation.
  • The MB 229.51 requires among many other severe constrains from the lubricant a reduced content of Sulfted Ash, Phosphorus and Sulphur in order to be compatible with MERCEDES exhaust gas after treatment systems. The specification MB 229.51 applies to some MERCEDES Gasoline engines, and to all MERCEDES Diesel engines, with or without DPF.
  • Specifications VW 502 00 and VW 505 00 require outstanding detergent/dispersant power, high oil film resistance and better viscosity increase resistance due to soot in order to cover many Gasoline engines and most of Direct Injection Diesel engines, except unit injector systems which require an approved VW 505 01 lubricant such as MOTUL Specific 505 01 505 00 502 00 5W-40 or MOTUL 8100 X-clean 5W-40. Attention, do not use MOTUL 8100 X-clean 5W-30 when a VW 504 00 or VW 507 00 lubricant is required, in that case use MOTUL Specific 504 00 507 00 5W-30 or MOTUL 8100 X-clean+5W-30.

RECOMMENDATIONS

  • Drain interval : refer to manufacturers' recommendations and tune to your own use.
  • Do not mix with lubricants not ACEA C3 compliant.
  • Before use always refer to the owner manual or handbook of the vehicle.

PROPERTIES

Viscosity grade SAE J 300 5W-30
Density at 20°C (68°F) ASTM D1298 0.847
Viscosity at 40°C (104°F) ASTM D445 70.8 mm²/s
Viscosity at 100°C (212°F) ASTM D445 12.0 mm²/s
HTHS viscosity at 150°C (302°F) ASTM D4741 3.5 mPa.s
Viscosity index ASTM D2270 166
Pour point ASTM D97 -36°C / -32.8°F
Flash point ASTM D92 230°C / 446°F
Sulfated ash ASTM D874 0.79% weight
TBN ASTM D2896 7.4 mg KOH/g

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.